Pension adjustment reversal (PAR): how leaving a pension plan can restore RRSP room

Short answer

What is a pension adjustment reversal, and how does it restore RRSP room? A PAR is an amount CRA adds back to your RRSP and PRPP contribution room when your membership in a registered pension plan (RPP) or deferred profit sharing plan (DPSP) ends and what you take out is worth less than the pension adjustments (PAs), and for defined benefit plans past service pension adjustments (PSPAs), that already cut your room. Your plan administrator calculates it and reports it on a T10; you do not file anything.

What it is
A restoration of RRSP room “lost” to PAs for benefits you did not end up keeping—typically unvested employer contributions in a DC plan or DPSP, or a defined benefit commuted value that is smaller than the PAs reported.
Who it helps
People who leave a workplace pension or DPSP (often after a job change) and take their termination benefit as cash or a transfer to an RRSP, LIRA or PRPP.
When it applies, and the catch
CRA keys on the end of membership, not the end of employment. If you leave your money in the plan, you are still a member and there is no PAR yet. A fully vested DC or DPSP exit, or a DB-to-DB transfer that recognizes your service, often produces a zero PAR.

CRA example (RC4137, Example 1): Paul leaves a DPSP after 18 months, before the plan’s 24-month vesting point. His PAs were $1,000 and $500, and he forfeits the $1,500 of employer contributions behind them plus $215 of interest. His PAR is $1,500—the interest is excluded because it was never part of his pension credits.

PA, PSPA, PAR and PAC at a glance

Amount (slip)RRSP roomWhen it arises (CRA)
PA (T4 box 52)Reduces next year’s roomEach year you earn RPP or DPSP benefits
PSPAReduces roomDB past-service credit or upgrade (post-1989)
PAR (T10)Adds room backMembership ends; benefit is less than PAs/PSPAs reported
PAC (T10)Adds room backMoney purchase over-contributions returned
High-level result when a PAR applies
RRSP room restored for the year membership ended

CRA: once it processes the T10 slip, your RRSP contribution room is increased by the PAR. Your plan administrator—not this page—calculates the amount.

Background: pension adjustment (PA) explains how the room was reduced in the first place. For leaving a DB plan, see commuted value; for locked-in transfers, LIRA withdrawal rules.

Educational overview only. No personal PAR or RRSP room is calculated here.

Got room back? See how RRSP savings and pension income change what you can spend each month

General information, not financial advice. CRA administers PA, PAR, PAC and RRSP deduction limits; your plan administrator calculates and reports your PAR.

How a PAR is worked out (CRA RC4137)
Plan typePAR (high level)
DPSPAmounts included in your pension credits up to termination that you are not entitled to at termination (forfeited, unvested). Earnings are excluded.
Money purchase (DC) RPPSame idea: employer contributions and similar amounts (such as reallocated forfeitures) in your pension credits that you forfeit. Interest is excluded.
Defined benefit RPPA + B − C − D. A = total pension credits (each year capped at the following year’s RRSP dollar limit); B = grossed-up PSPAs; C = specified distributions (the post-1989 part of what is paid out); D = PA transfer amount when benefits move to another DB provision.
Specified multi-employer plan (SMEP)No PAR, even if the benefit is less than contributions made.
RRSP, PRPP, foreign planNo PAR—CRA calculates PARs only for RPPs (other than SMEPs) and DPSPs.

CRA termination conditions also apply (see Full guide). Dollar figures on this page are CRA’s own worked examples from RC4137, not estimates for you.

Assumptions / what this page does not do
  • Does not calculate a personal PA, PSPA, PAR or PAC, or estimate your RRSP deduction limit—your plan administrator and CRA do that.
  • Does not claim WisePlan calculates PAR, PAC, T10 amounts or official RRSP room, files returns, or claims credits.
  • Does not cover provincial pension-standards rules on vesting, locking-in or transfers; those vary by jurisdiction—see /unlock-lira/ and /commuted-value/.
  • Does not replace /pension-adjustment/, /rrsp-contribution-room/ or /rrsp-overcontribution/.
Sources

Sources (checked 12 October 2026): CRA RC4137, Pension Adjustment Reversal Guide: PAR definition; membership vs employment; date of termination; DPSP, money purchase and defined benefit (A + B − C − D) calculations; SMEPs; PAC (A − B − C); T10 reporting, $50 threshold, quarterly deadlines, zero PARs, and that employees do not attach the T10 slip to their return. CRA Form T10, Pension Adjustment Reversal (PAR) or Pension Adjustment Correction (PAC): slip completed by the RPP administrator or DPSP trustee and used by CRA to help determine the employee’s RRSP deduction limit. CRA Pension Adjustment Reversal (PAR) for plan administrators: a member is a member as long as they have money in the plan, with the two-employee example. Related on this site: pension adjustment, RRSP contribution room, commuted value.

FAQ
What is a pension adjustment reversal (PAR)?
CRA’s Pension Adjustment Reversal Guide (RC4137) defines a PAR as an amount added to an individual’s RRSP and PRPP contribution room when they stop being members of a deferred profit sharing plan (DPSP) or a registered pension plan (RPP). It restores room when the termination benefit is less than the total pension adjustments (PAs), and for defined benefit plans past service pension adjustments (PSPAs), previously reported.
Do I get a PAR when I leave my job?
Not automatically. CRA says the trigger is the end of plan membership, not the end of employment. You are generally still a member while you have rights to a benefit (money in the plan). The date membership ends is generally the date the plan pays the termination benefit, in cash or as a transfer to an RRSP or PRPP. If you leave your entitlement in the plan, there is no PAR yet.
How is a PAR calculated?
Your plan administrator calculates it, not you. Per CRA’s RC4137: in a DPSP or money purchase (defined contribution) RPP, the PAR is the employer contributions and similar amounts included in your pension credits that you are not entitled to at termination (forfeited, unvested amounts); earnings on them are not included. In a defined benefit provision, the PAR is A + B − C − D: total pension credits (each year capped at the following year’s RRSP dollar limit), plus grossed-up PSPAs, minus specified distributions (the post-1989 part of what is paid out), minus any PA transfer amount. Specified multi-employer plans (SMEPs) do not get PARs.
Do I need to file anything to get my PAR?
No. The plan administrator (or DPSP trustee or employer) reports the PAR to CRA and to you on a T10 return, filed quarterly. A PAR of at least $50 must be reported, and a zero or negative PAR is not reported. CRA says employees do not attach the T10 slip to their income tax and benefit return; once CRA processes the T10, your RRSP contribution room increases for the year membership ended.
What is the difference between a PAR and a PAC?
A PAR restores RRSP room when plan membership ends and the termination benefit is less than the PAs and PSPAs reported. A pension adjustment correction (PAC) restores RRSP room when over-contributions to a money purchase provision are returned to the individual or the employer. Both are reported on the T10 return.
Does WisePlan calculate my PAR or RRSP room?
No. WisePlan Wealth is a Canada on-device retirement spending planner (privacy/no-account). It models RRSP/TFSA/non-registered balances, spending over retirement years, and estate or Legacy estimates. It does not calculate a PA, PSPA, PAR or PAC, prepare or read a T10, determine your official RRSP deduction limit, file returns, or claim credits. Confirm restored room with CRA, then use the app to model what you do with it.
Full guide

What is a pension adjustment reversal and how does it restore RRSP room? Each year you belong to a workplace pension or DPSP, a pension adjustment (PA) reduces the RRSP room you get the following year. If you later leave the plan and walk away with less than those PAs assumed—because employer money was unvested, or a defined benefit commuted value is smaller—CRA’s pension adjustment reversal puts the difference back. Related: pension adjustment, RRSP contribution room, defined-contribution pension, defined benefit pension, and RPP vs RRSP.

WisePlan Wealth is a Canada on-device retirement spending planner (privacy/no-account). It models whether your net worth lasts through retirement, how much you can spend monthly, RRSP/TFSA/non-registered balances over retirement years, and estate or Legacy estimates. It does not calculate a PA, PSPA, PAR or PAC, prepare or read a T10, determine your official RRSP deduction limit, file returns, or claim credits.

Why a PAR exists

CRA’s RC4137 explains that tax-assisted retirement savings share one overall limit of 18% of earned income, up to a dollar limit, across RPPs, DPSPs, RRSPs and PRPPs. Your PA is the total of your pension credits for the year, and it reduces your RRSP and PRPP limit the following year. A PSPA does the same for defined benefit past-service credits or upgrades for post-1989 years. CRA says PARs restore RRSP room so the system stays fair for people who change jobs or move in and out of the workforce.

What triggers a PAR: membership, not employment

RC4137 says you must have stopped being a member of the DPSP or the pension provision—your employment does not have to end, and ending employment alone is not enough. You are a member as long as you have rights to a benefit. The date of termination is generally the date the plan pays the termination benefit, either in cash or as a transfer to your RRSP or PRPP. CRA’s example: someone who left a job in 2016 but received the termination benefit in 2017 has a 2017 PAR.

CRA’s PAR page for administrators gives a second example: two employees leave on the same day. One transfers benefits to an RRSP in December and gets a PAR for that year; the other leaves the entitlement in the plan until retirement, is still a member, and is not eligible for a PAR. Being entitled to benefits under an annuity contract also counts as still being a member, per RC4137.

CRA’s termination conditions also require that membership ended after 1996 for a reason other than death, and that you received no instalment payments (DPSP) or no retirement benefits (RPP) under the plan.

DPSP and defined contribution plans: the forfeited employer money

In a DPSP or money purchase RPP, CRA says the PAR is the total of amounts that were included in your pension credits up to termination but that you are not entitled to at termination—usually unvested employer contributions and forfeitures reallocated to you. Investment earnings are left out because they were never part of the pension credit. CRA’s Example 2 (Kate, money purchase RPP) shows a PAR of $9,200: an $8,000 employer contribution plus a $1,200 share of reallocated forfeitures, excluding $1,400 of interest. If you were fully vested, the PAR is zero.

Defined benefit plans: A + B − C − D

For a defined benefit provision, RC4137 uses A + B − C − D:

  • A — total pension credits earned under the provision to termination. For high earners, each year’s credit counted in A is capped at the RRSP dollar limit for the following year.
  • B — the grossed-up PSPAs for past-service benefits, ignoring any qualifying transfers that funded them.
  • C — specified distributions: the part of what is paid out that relates to post-1989 benefits. Pre-1990 benefits, transfers to another DB provision, surplus payments and certain other items are excluded.
  • D — the PA transfer amount when your service is recognized under another DB provision (for example a reciprocal transfer to a new employer’s plan).

CRA’s Example 3 (Julie): pension credits of $40,000, a grossed-up PSPA of $10,000, and a $35,000 termination benefit transferred to a locked-in RRSP give a PAR of $15,000. When benefits move to another DB plan that recognizes the same service, D often offsets A and the PAR is zero—CRA notes the benefits were replaced, not lost. Specified multi-employer plans (SMEPs) do not get PARs. Leaving a DB plan usually also means choosing between a commuted value and a deferred pension; a locked-in transfer is governed by rules like those in LIRA withdrawal rules.

How the PAR reaches your RRSP room: the T10

The plan administrator (for an RPP) or the trustee or employer (for a DPSP) reports the PAR on a T10 return—T10 slips plus Form T10SUM, and in larger filings T10SEG. CRA’s Form T10 page describes the slip as completed by the plan and used by CRA to help determine your RRSP deduction limit. You get copy 2 of the slip. Per RC4137:

  • A PAR (or PAC) of at least $50 must be reported to CRA and to you. It is also reported if you or CRA ask for an accurate figure.
  • T10 returns are filed quarterly: within 60 days after the end of each of the first three calendar quarters, and before February for the October–December quarter.
  • A zero or negative PAR is not reported.
  • You do not attach the T10 slip to your income tax and benefit return. Once CRA processes it, your RRSP contribution room increases by the PAR for the year membership ended.

Before contributing the restored room, confirm your updated RRSP deduction limit with CRA (My Account or your notice of assessment). Contributing ahead of CRA’s figure risks an RRSP overcontribution. A spousal RRSP contribution still uses your own room, and near 71 the conversion deadline matters—see RRSP at 71.

Pension adjustment correction (PAC), briefly

A PAC is the sibling amount. RC4137 says a PAC restores RRSP room when over-contributions to a money purchase provision—contributions that would put the plan in a revocable position, or that were made through a reasonable error—are returned to you or your employer. It covers returned contributions for the 10 preceding calendar years, uses the formula A − B − C, and is limited to the RRSP room the over-stated PAs actually took away. Like a PAR, it is reported on the T10.

Put restored room into a spending plan

A PAR answers a narrow question—how much RRSP room you get back. The bigger question is what to do with it and with the money you took out of the plan. WisePlan Wealth lets you enter RRSP and TFSA balances (including money moved out of the plan), the RRSP contributions you plan to make with restored room, pension income, CPP and OAS, then see whether your net worth lasts and how much you can spend each month—on your device. It does not calculate your PAR or official room; use CRA’s figure as the input. Get WisePlan. Free to start. No account. Data stays on the device.

Related guides

Source: Canada.ca, checked Oct 2026.

This is general information, not financial, tax, investment, legal, or accounting advice. PA, PSPA, PAR and PAC rules are set by Parliament and administered by the CRA and can change. Your plan administrator calculates and reports your PAR; confirm your RRSP deduction limit on Canada.ca, in CRA My Account, or with a qualified professional. Page dated 12 October 2026.